Platinum UltraClear Fast Setting epoxy is an alternative to the other 55 varieties of Platinum resins. Platinum UltraClear is twice as fast as Deep Cast resins, and is suitable for making small pieces, cheeseboards, small arts, coatings, etc. Just a few of the range of Platinum Epoxies - resins like our Rapid cure epoxies, food grade (if you require these?) High temperature epoxies (up to 1830 deg C), just some of over 56 different resins.

With Platinum UltraClear, You can shorten the curing time even further by applying mild heat. Suitable for making small pieces (pendant; coaster; any weights from a few grams to a few hundreds gram) and flat surface coating.

Fast setting within 24 hours.

Do not pour over 12mm (1/2") to avoid overheating.

Avoid mixing over 1Ltr (0.26 Gal) each time.

Mixing Ratio 2:1 by volume.

Note: Always close the caps after each usage, otherwise the contents might turn cloudy and skin might form if the bottle cap left open. Larger quantities available upon request, please contact us.

Platinum MANUFACTURED - Best Quality, Best Value and Reliable Epoxy Resin

These are high quality products & MADE IN AUSTRALIA - NOT overseas products getting relabelled and filled in USA, and please don't risk your work on the cheap stuff - can't tell you how many customers have told me they purchased the cheaper resin and it ruined their work - there are important standards for art resin.

Our Epoxy Resin have decisive advantages and benefits to the user over those offered by other brands. Premium products using premium ingredients from the best suppliers.

Why you should choose Platinum UltraClear Epoxy Resin:

★ No VOC; Zero Solvent; BPA Free; Eco Friendly; Meet and Exceed Standards AS 2311-2017 and ASTM D3960-05

★ Crystal Clear Finish: Cures Crystal Clear. One of the clearest epoxies you can find. Suitable for wooden bar tops, embedding pictures, bottle cap table projects & more

★ UV Resistant Formula: Added UV Inhibitors resist yellowing when exposed to the sun and Ultra Violet light

★ Self Level Mixture: Will self level over surfaces including corners, bar rails and edges leaving consistent thickness

★ Superior Air Release: Some epoxies may bubble, fish eye or crater. Our Platinum UltraClear formula features superior air release, minimizing these concerns

★ Impact Resistant: Cures super strong, leaving a smooth impact resistant surface

★ Minimal odour and NOT AT ALL yellowing after long period of time.

★ Easy To Use: 2 to 1 by volume mix ratio and Food Safe when mixed and cured correctly

Our Epoxy will leave your projects with a durable, UV resistant, impact resistant high gloss finish. Don't ruin a one-of-a-kind project with an inferior epoxy.

Coverage depends on temperature (Epoxy resins before mixing act a little like honey - in summer, they are very runny while in winter they are less runny) and so coverage can vary up from 250 grams per square meter per coat.

Platinum UltraClear is a 2 part (2 parts A and 1 part B by volume) Fast Curing Epoxy resin which when mixed with hardener is poured into a mould and sets to a strong, hard finished product.

Platinum UltraClear is resistant to most household chemicals and can withstand surface temperatures around 80-85 deg C (185 deg F)(resisting marks from hot drinks etc).

The special fast curing character allows this product demould within 24 hours.

The fast curing of Platinum UltraClear is not suitable for deep casting. We have about 56 other resin types to suit every need. This product is for someone who is in a hurry. For even shorter cure times, use Platinum 360+, Platinum HiTemp100 in a 2:1 ratio or if needed in a 1:1 variant? Then Platinum ART CLASS or the longer curing Platinum Art Coat. This product can be used for outdoor use.

Directions for use: Mix resin and hardener EXACTLY in 2:1 ratio (Note: by volume not by weight) Use a plastic container for mixing. DO NOT use metal, especially aluminium containers to mix. Mixtures will turn milky colour in aluminium containers. The plastic container must be extremely clean, free of dirt; water; oil; and other contamination. Tiny contamination would deteriorate the quality of final result. Once the product is poured into the mould, do not stir it or touch the surface to avoid defects. Most foam will float to the surface and burst itself. The curing will take 24 hours.

Following factors affect the curing time:

1. Mixing quantity (the more you mix, the fast it cures and vice versa).

2. Room Temperature (higher room temperature will speed up the curing)

Mixing ratio: 2:1 (2 Parts A and 1 Part B) by volume.

Application temperature: Wide temperature range through summer to winter.

Pot life(working time): 1-2 hours (Data based on 100ml mixing; 20 degree C / 68 deg F room temperature).

Please pour this product into mould as soon as possible, to avoid bubbling.

Time to reach non-tacky: 5-18 hrs Depending on the room temperature (Data based on 100ml / 4 oz mixing).

Time to reach full cure: 24 hrs (Data based on 100ml / 4 oz mixing).

Viscosity: 600 cps for Part A (Brookfield 20 rpm). 150 cps for Part B (Brookfield 20 rpm).

Clarity: Pt-Co value < 10 for both Part A and Part B

Compatibility: Binding to metal, inorganic materials including cement; glass, stone, natural materials including wood; particle board, most plastics except polyethylene, polypropylene, EPDM.

Shelf life: 12 months

Please Note: As this product is very pure epoxy. And it acts in a similar manner just like pure honey (epoxies act similar to honey in that, during winter honey is extremely thick and yet in summer, that same honey is very thin and runny). So it is with epoxies. And just like pure honey which sometimes turns to sugar? Pure Epoxy resin can act in a similar way and develop crystals (usually in Part A). this is not from faulty resin but common thought is that it is from the cyclic hot days and cold nights when stored. An easy fix is to heat the jugs up in scalding hot water for about 30 mins and this will restore the resin to perfectly clear. The heating is also good to help remove air bubbles trapped in the epoxy due to transportation.

If I have to do a critical pour or application, as a tip, I heat the jugs up the day before the pour and let them cool down for the day of my pour. Additionally when mixing the two parts, I decant into the mixing container by pouring down the side of the container. All this effort is to try to limit any possible air bubbles that could ruin the finished product. Even when mixing, I use a wide rule and do not even take it off the bottom of the mixing container. Mixing is so important to get the best results and can take 3 to 5 mins.

Sizes: 375 ml, 750 ml, 1.5 Ltr, 3 Ltr (0.79 Gal), 15 Ltr 300 Ltr

Manufactured by Platinum Epoxies

For material safety sheet, msg us refer SDS, do not swallow, keep away from children. CAUTION: All epoxies (except of FDA Food Grade, share the same chemical natural. Treat this like other epoxy. DO NOT SWALLOW. DO NOT CONTACT. Use all necessary PPE. KEEP AWAY FROM CHILDREN. For those with allergies? Use Platinum 360+ or Platinum HiTemp100 or Platinum Art Class.

Disclaimer: You must be a least 21 years old to order and possess the knowledge regarding toxicity, health hazards, and all regulations required to store, use and dispose of this compound. No warranties are expressed or implied for any reason by the seller. The purchaser agrees to hold harmless the seller in any event, whether accident or injury, regarding the use or misuse of this compound. By purchasing and paying for this item, you are agreeing to this disclaimer.

• Absolute water clarity
• Say good bye to bubbles!
• Awesome rock hard gloss
• Such competitive pricing!
• Easy 2:1 by volume ratio - Zero VOC's
• Cast up to 12 mm thick
• The low viscosity makes this a very economical Epoxy - covers so well!
• As volume builds, planned to be made in USA - employing locals during covid pandemic.
• May be supplied in different containers due to availability

Suspected faulty product: Stringent production processes include testing at production and further testing at packaging are designed to prevent any possible faulty products from being sent to customers. 99.9% of customer reported faults can be traced back to user error. We request that the customer complete a resin test before before reporting a possible fault. For testing of resin, use the following link: Resin testing Additionally, when products are sold to 1000's of users worldwide without problems coming from the same source? Then individual problems are mostly traced back to user error.

Please Note: As this product is a very pure epoxy. And it acts in a similar manner just like pure honey (pure epoxies act similar to honey in that, during winter, honey is extremely thick and yet in summer, that same honey is very thin and runny). So, to it is with epoxies. And just like pure honey which sometimes turns into sugar, pure Epoxy resin can act in a similar way and develop crystals (usually in part A). This is not from faulty resin, but common thought is that it is from the cyclic hot days and cold nights when stored. An easy fix is to heat the jugs up in very hot water for about 30 mins and this will restore the resin to be perfectly clear. That heating is also a good thing to help remove air bubbles trapped in the epoxy due to transportation.

If I have to do a critical pour or application, as a tip, I heat the jugs in near boiling water the day before the pour and let them cool down for the day of my pour. Additionally when mixing the two parts, I decant into the mixing container by pouring down the side of the container using the lower viscosity hardener first, followed by the base resin. All this effort is to try to limit any possible air bubbles that could ruin the finished product. Even when mixing, I use a wide rule and do not even take it off the bottom of the mixing container. Mixing is so important to get the best results and can take 3 mins.